Breaking

Wednesday, 5 September 2018

SLIP FORM : Dismantling Procedure

Straight Slipform



1. Provide coil nuts in the final layer of concrete approximately 300 mm from top of concrete. 

2. Fix dismantling brackets, handrails, finish planking and transfer the load of slipform assembly to the brackets. 

3. Remove the flying tie rod assembly and lower the same. 

4. Remove the inside and outside hanging scaffold and shift the planks to the staging brackets. 

5. Remove the jacks and sleeves. 

6. Remove the yoke assembly, which consists of yoke legs, yoke beams and waler shoes. 

7. Remove inside & outside walers. 

8. Remove the wall forms, while removing the waler. 

9. Extract the jack rods and grout the holes. 

10. Remove dismantling brackets after completing other works. 


Tapering Slipform 

1. Provide coil nuts in the final layer of concrete. 

2. Fix dismantling brackets, handrails, and fix the planks. 

3. Remove and re-locate the R.G.Hoist to the required location (if it is there). 

4. Transfer the load of slipform assembly and main truss to the wall. 

5. Remove & re-fix the safety net with the temporary platform. 

6. Remove the inside & outside hanging scaffolding. 

7. Remove all the hydraulic hoses, manifolds and the jacks. 

8. Remove the intermediate form supports, spindles, turnbuckle, shutters, form supports, wall thickness screws, radius screws and yoke beams. 

9. Remove inside & outside yoke legs. 

10. Dismantle the truss assembly. 

11. Extract the jack rods and grout the hole.

12. Lower the materials then and there. 

13. Remove the dismantling platform.

_________________________________________________________________________________

Official Website  

Official Website

Download OfficialApp

Download App For Interview

YouTube Channel

Facebook Page

Twitter

Pinterest

Instagram

Google plus

Email Id
civilengineeringofficial@gmail.com
Don't Forget To Join Our Community For Latest Updates
×
bloggerWidget